What are the Specifications of Ferrari 360 Challenge Wheels? | OEM Fitment & Gallery

What are the Specifications of Ferrari 360 Challenge Wheels? | OEM Fitment & Gallery

What are the Specifications of Ferrari 360 Challenge Wheels?

Direct Answer: Official 19-inch Ferrari 360 Challenge & Challenge Stradale wheels measure 19x8.0" ET33 front (OEM Part 271994) and 19x10.5" ET40.5 rear (OEM Part 271993) with a 5x108mm bolt pattern and 67.1mm hub bore. Paired with 235/35-19 front and 295/30-19 rear tires, this 1-piece forged monoblock setup fits the 360 Modena, 360 Spider, 360 Challenge Stradale, and F430 with full clearance for factory Carbon Ceramic Brakes (CCM).

2004 Ferrari 360 Challenge fitted with 19x8 ET33 front and 19x10.5 ET40.5 forged monoblock Challenge wheels
Build Showcase: 2004 Ferrari 360 Challenge on 19x8" ET33 & 19x10.5" ET40.5 Forged Wheels from the Players Club Cars Gallery.

Complete Ferrari 360 Challenge Wheel Specification Matrix

Originally developed by BBS for Ferrari's motorsport Challenge race cars and homologated for the 2003–2004 360 Challenge Stradale, the 14-spoke Challenge wheel combines low unsprung rotational mass with wide inner-barrel brake clearance.

Technical Parameter Front Axle Specification Rear Axle Specification
Diameter & Rim Width 19 x 8.0 Inches (18 x 7.5" on early track Challenge) 19 x 10.5 Inches (18 x 10.0" on early track Challenge)
Factory Offset (ET) ET 33.0 mm ET 40.5 mm
OEM Ferrari Part Number 271994 271993
Bolt Pattern (PCD) 5 x 108 mm 5 x 108 mm
Center Bore & Lug Hardware 67.1 mm Hub-Centric (M14 x 1.5 Bolts) 67.1 mm Hub-Centric (M14 x 1.5 Bolts)
Recommended Tire Size 235/35 ZR19 (Michelin Pilot Sport) 295/30 ZR19 (Michelin Pilot Sport)
Construction & Brake Fitment 1-Piece Monoblock Forged; Clears 380mm CCM 1-Piece Monoblock Forged; Clears 350mm CCM

Frequently Asked Questions: Ferrari 360 Challenge Wheel Fitment

1. What is the difference between 18-inch 360 Challenge race wheels and 19-inch Challenge Stradale wheels?

Early Ferrari 360 Challenge race cars ran 18-inch magnesium/forged wheels (18x7.5" front and 18x10" rear) designed for slick racing tires. For the road-going 2003–2004 Ferrari 360 Challenge Stradale, Ferrari upsized the design to 19x8" ET33 front and 19x10.5" ET40.5 rear to accommodate massive 380mm front Carbon Ceramic Matrix (CCM) brake rotors. Both the classic 18-inch and modern 19-inch builds are featured in the Players Club Cars Ferrari 360 Modena Wheels Gallery.

2. Will 19x8" ET33 and 19x10.5" ET40.5 Challenge wheels fit a standard 360 Modena or 360 Spider?

Yes. Standard Ferrari 360 Modena and Spider models share the exact same wheel hubs, 5x108 bolt pattern, and fender architecture as the Challenge Stradale. Moving from the factory 18-inch star wheels (18x7.5" ET31.5 front / 18x10" ET38.95 rear) to the 19-inch Challenge specification fills out the wheel arches cleanly with zero rubbing, spacers, or suspension modifications required.

White 2004 Ferrari 360 Challenge Stradale equipped with OEM 19-inch silver forged Challenge wheels
OEM+ Reference Build: White 2004 Ferrari 360 Challenge Stradale on OEM 19" Wheels in Classic Argento Silver.

3. What are the best tire sizes for 19-inch Ferrari 360 Challenge wheels?

For optimal speedometer calibration, ABS/ASR traction control compatibility, and crisp turn-in response, run 235/35 ZR19 tires in the front and 295/30 ZR19 tires in the rear (such as the Michelin Pilot Sport 4S or Pilot Sport Cup 2).

4. Are custom finishes and larger diameters available for the Ferrari 360?

Yes. While Classic Argento Silver in 19 inches is the purest factory specification, Players Club Cars machines each 1-piece monoblock forged set to order in diameters from 18" up to 22" with custom finishes including Motorsport Gold, Satin Gunmetal, Gloss Black, and Brushed Clear. See real examples on our 2000 Ferrari 360 Spider on Gold 19" Challenge Wheels and 2004 Ferrari 360 Spider on Silver 19" Challenge Wheels build pages.

2000 Ferrari 360 Spider fitted with bespoke Gold 19-inch forged Challenge wheels
Custom Finish Showcase: 2000 Ferrari 360 Spider on Gold 19" Challenge Wheels (19x8" ET33 / 19x10.5" ET40.5).

Players Club Cars Forged Challenge Wheel Pricing (Set of 4)

Every set is CNC-machined from high-strength aerospace-grade forged billet aluminum to match your vehicle's exact VIN, brake package, and offset preferences (6–8 weeks production with insured worldwide delivery):

Diameter Configuration Application / Stance Profile Complete Set Price (USD)
18" Set Classic 360 Modena / Early Challenge Track Spec $4,500
18" / 19" Staggered Set Period-Correct Rake Stance $5,000
19" Set (19x8" ET33 / 19x10.5" ET40.5) Factory OEM Challenge Stradale & F430 Spec $5,500
19" / 20" Staggered Set Modern OEM+ Flush Fitment $6,000
20" Set Aggressive Modern Diameter $6,500
20" / 21" Staggered Set Custom Staggered Show & Street $7,000
21" to 22" Custom Sets Bespoke Concave Builds $7,500 – $8,500
Back to blog

Leave a comment